Skip to main content
Additive Manufacturing
Precision Machining
Metal Additive
Metal Additive Production
Injection Molding
Polymer 3D

Test Logo Module

Liquid Properties Optical Properties
Appearance Off-White Ec 9.3 mJ/cm2 [critical exposure]
Viscosity ~380 cps @ 30°C Dp 4.3 mils [slope of cure-depth vs. In (E) curve]
Density ~1.12 g/cm3 @ 25°C E10 95.1 mJ/cm2 [exposure that gives 0.254 mm (.010 inch) thickness]
Liquid PropertiesOptical Properties
AppearanceOff-WhiteEc9.3 mJ/cm2[critical exposure]
Viscosity~380 cps @ 30°CDp4.3 mils[slope of cure-depth vs. In (E) curve]
Density~1.12 g/cm3 @ 25°CE1095.1 mJ/cm2[exposure that gives 0.254 mm (.010 inch) thickness]
Mechanical PropertiesUV Postcure
ASTMProperty DescriptionMetricImperial
D638MTensile Modulus2,964 MPa430 ksi
D638MTensile Strength at Yield56.8 MPa8.2 ksi
D638MElongation at Break11%
D2240Flexural Modulus2,654 MPa385 ksi
D256AIzod Impact (notched)38.9 J/m0.729 ft-lb/in
D2240Hardness (Shore D)82
D570-98Water Absorption0.4%
Liquid Properties
AppearanceOff-White
Viscosity~380 cps @ 30°C
Density~1.12 g/cm3 @ 25°C
Optical Properties
Ec9.3 mJ/cm2[critical exposure]
Dp4.3 mils[slope of cure-depth vs. In (E) curve]
E1095.1 mJ/cm2[exposure that gives 0.254 mm (.010 inch) thickness]
Mechanical PropertiesUV Postcure
ASTMProperty DescriptionMetricImperial
D638MTensile Modulus2,964 MPa430 ksi
D638MTensile Strength at Yield56.8 MPa8.2 ksi
D638MElongation at Break11%
D2240Flexural Modulus2,654 MPa385 ksi
D256AIzod Impact (notched)38.9 J/m0.729 ft-lb/in
D2240Hardness (Shore D)82
D570-98Water Absorption0.4%
test 1 test 2 test3 test 4 test 5 test 6

test

test

test

test

Copyright 2025 All Rights Reserved |